Filter
Top Products
D-160 Owner's Manual (Names and Functions)
15
10. Shift key [SHIFT]
Use this key to choose recording tracks.
When the shift LED lights off, it allows you to choose track 1~8.
When the LED is on, tracks 9~16 can be chosen.
11. Auto Play/Auto Return key
Pressing this key repeatedly will change Auto Play mode, Auto Return mode, and Repeat
mode On/Off as follows: (
: LED off,
: LED light up)
Auto Repeat ON (Both AUTO PLAY and AUTO RTN LEDs are lit.)
Auto Return ON (Only the AUTO RTN LED is lit.)
Auto Play ON (Only the AUTO PLAY LED is lit.)
Auto Play/Auto Return OFF (All LEDs are off.)
Auto Play mode:
In this mode, playback will start automatically after the START point is located.
This function is effective at any locate points other than the ABS END point.
Auto Return mode:
When the END point is reached during playback, the START point is automatically
located in this mode. This function is effective only when the START and END points
have been specified.
<Note>
The Auto Return function is works only during playback. In the recording mode, the
START point will not be located automatically when the END point is reached.
Auto Repeat mode:
This mode is a combination of Auto Play and Auto Return, and plays back the part
between the START and END points repeatedly. The auto repeat function is effective
only when the START and END points have been specified correctly.
* Refer to page "67" for details.
12. Clipboard In key [CLIPBOARD IN]
This key is used to store and recall the In point (CLIPBOARD IN point) for the Copy or
Move operation. You can locate a stored CLIPBOARD IN point.
* Refer to page “85” for copying/moving data.
* Refer to page "67" for locating the CLIPBOARD IN point.
13. Clipboard Out key [CLIPBOARD OUT]
This key is used to store and recall the Out point (CLIPBOARD OUT point) for the Copy or
Move operation. You can locate a stored CLIPBOARD OUT point.
* Refer to page "67" for locating the CLIPBOARD OUT point.
* Refer to page "85" for copying/moving data.
14. Auto Return Start key [AUTO RTN START]
This key is used to store and recall the start point (AUTO RTN START point) for the Auto
Return or Auto Repeat operation.
You can locate a stored AUTO RTN START point.
* Refer to page "69" for more information about Auto Return and Auto Repeat.
AUTO RTN
AUTO PLAY
AUTO RTN
AUTO PLAY
AUTO RTN
AUTO PLAY
AUTO RTN
AUTO PLAY