Filter
Top Products
D-160 Owner's manual (SETUP mode)
146
Tempo Register
5. Press the EXECUTE/YES key when the D-160 displays "TEMPO".
The display will show flashing "*** bar" so that it allows you to enter a new tempo changing
point.
6. Use either the HOLD/> key or SHUTTLE dial to choose "bar", " beat" or "TEMPO".
Then, use the JOG dial to enter a required bar/beat and tempo that you want to register.
The bar numbers and beat you can enter follows the time signature setting described in the
previous section, and the tempo settings you can enter are 30 ~ 250 bpm. For your information,
the "- - -" means "No tempo setting registered" and can be used to delete a tempo change point.
When you turn the JOG dial while the display shows "*** bar" or "* " flashing, it will either
show the tempo as "***" on the already registered bar/beat or as "- - -" if a bar/beat has no tempo
setting registered.
7. Press the EXECUTE/YES key after you have entered a required bar/beat and tempo.
The setting will now be registered. Then, the display will go back to Item 5 and show "*** bar"
flashing so which you to enter a new tempo setting.
8. Repeat the procedures described in items 5 ~ 7 to register further tempo settings.
* Press either the STOP button or EXIT/NO key to return from the second step to the first or
to quit SETUP mode. The menu will go backwards each time you press either key so that you
can correct the setting, choose some other SETUP mode or eventually return to the normal
time base display.
<Note>
You can register the setting up to 64 points. If you try to register over 64 points, the 65th point
onwards will be ignored.
Example : A tempo map can be setup as in the following example, i.e. set the required tempo after having set
time signature.
Tempo Map
Time Signature Setting Tempo Setting
001 bar 4/4 001 bar 1 , =120
003 bar 1 , =90
005 bar 3/4 005 bar 3 , =60
007 bar 2 , =120
Tempo Setting Edit or Delete
Follow the procedures described as in Items 1 ~ 5.
6. Use either the HOLD/> key or SHUTTLE dial to choose "bar", " beat" or "TEMPO".
Then, use the JOG dial to enter a required bar/beat and tempo that you want to edit.
The display will show tempo as "***" on the already registered bar/beat.
7. Press the HOLD/> key or turn the shuttle dial to choose the "
=*** ".
The flashing display will move to " =*** " so that it allows you to change the tempo setting.
8. With the JOG dial, choose a required tempo.
If you choose "- - -", the tempo setting on the bar/beat will be deleted.
9. Press the EXECUTE/YES key after you have changed or deleted the tempo setting on the bar/
beat you wanted.
The setting will now be registered. Then, the display will go back to Item 5 and show "*** bar"
flashing, which allows you to enter a new tempo setting.
* Press either the STOP button or EXIT/NO key to return from the second step menu to the
first or to quit SETUP mode. The menu will go backwards each time you press either key so
that you can correct the setting, choose some other setup mode, or eventually return to the
normal time base display.
<Note>
You cannot register the "- - -" at the 001 bar 1 .