Filter
Top Products
D-160 Owner's Manual (MIDI sync function)
117
POWER
SHIFT
AUTO
CLIPBOARD PLAY
LOCATE ABS 0
DIGITAL MULTITRACK RECORDER
D-160
IN / OUT
PUNCH
PGM CHANGE
8/167/156/145/134/123/112/101/9
RECORD TRACK
HD ACCESSLOCKED MTC IN
ENDIN OUTSTART
AUTO PUNCH
AUTO PLAY IN OUT
AUTO RTN
CLIPBOARD
PASTEMOVECOPY
AUTO RTN
ERASE UNDO REDO
DISP SEL
EXECUTE
/YES
EXIT
/NO
HOLD/ STORE RECALL
TIME BASE SEL
TAKE
REHEARSAL
LOCATEPUNCH
F FWDREWINDPLAYSTOPRECORD
VARI PITCH
LOCATE ABS END
External Mixer
INPUT 1 - 8
BUSS OUT (GROUP OUT) 1 - 8
INPUT L/R
STEREO OUT L/R
MIDI IN
MIDI OUT
INPUT
MIDI Clock &
Song position
pointer
MIDI sync function
The following are examples concerning general types of systems using MIDI
related functions contained in the D-160.
1. MIDI clock sync system
By setting any desired meter at any desired point of the programmable tempo map
contained in the D-160, and by output of a MIDI clock and song position pointer
according to the setting, a hardware type MIDI sequencer can be synchronized as a
MIDI clock slave. Consequently, in this system, the D-160 will be the master and
the MIDI sequencer the slave.
Unlike conventional tape type MTR, all sixteen tracks can be fully utilized without
wasting one track on a sync signal.
* Restore the default settings on D-160.
* Check for the correct program and proper sampling frequency.
Connecting external equipment (Refer to connecting schematic)
1
. Connect the D-160 MIDI OUT to MIDI IN of the MIDI sequencer.
2
. Set the MIDI sequencer for "external sync mode (EXTERNAL SYNC) by MIDI clock."
* Refer to the Owners Manual of the equipment in use for details.
MIDI sequencer
Master
Recorder
MIDI sound sources
MIDI IN
D-160
MIDI OUT
OUTPUT 1 - 16
TAPE IN 1 - 16