Filter
Top Products
D-160 Owner's Manual (Edit function)
88
5
1
1, 3
2
3
6
4
<Note 1>
If you press the COPY key without selecting a copy source track by the RECORD
TRACK select key, the display will show "Select Track!" (meaning “Select a copy track.”)
and return to the previous screen. In this case, select a copy source track and try to
copy the data again.
<Note 2>
If an Output point has been specified before the In point (the In point value is the
same or large than the Out point value), the display will show the error message
“Void In Point!” or “Void Out Point!” and return to the previous screen. In this case,
set the correct In/Out points and try again to copy the data.
<Note 3>
The data on the Clipboard will be replaced by new data each time you press the COPY
key or the MOVE key.
Listening to sound data copied on the clipboard (Clipboard Play function)
To listen to the sound data currently copied to the clipboard, press the
PLAY button while holding down the STOP button (Clipboard Play mode).
The data will be played back from the beginning. To stop the playback in
the middle, press the STOP button.
* During the clipboard playback, the display show the position of the source data
referenced to the selected time base.
1-2. Copy & Pasting
You can paste data to the same track as the source. For example, if you
copied data on Track 1, data will be pasted on Track 1. Data will be pasted
starting from the Auto Punch In point.
<Note>
You need enough unrecorded space on the hard disk to execute the Copy & Paste operation.
If you press the PASTE key with insufficient disk space, the display will immediately show
the error message “Over !”, and then show the excess time using the currently-selected Time
Base (time or bar).
In this case, shorten the copy data by the amount of excess time. Alternatively, move ABS
END backward using the ERASE function as described in page “96” of this manual in order
to obtain more free space on the hard disk.
SHIFT
AUTO
CLIPBOARD PLAY
LOCATE ABS 0
DIGITAL MULTITRACK RECORDER
D-160
IN / OUT
PUNCH
PGM CHANGE
8/167/156/145/134/123/112/101/9
RECORD TRACK
HD ACCESSLOCKED MTC IN
ENDIN OUTSTART
AUTO PUNCH
AUTO PLAY IN OUT
AUTO RTN
CLIPBOARD
PASTEMOVECOPY
AUTO RTN
ERASE UNDO REDO
DISP SEL
EXECUTE
/YES
EXIT
/NO
HOLD/ STORE RECALL
TIME BASE SEL
TAKE
REHEARSAL
LOCATEPUNCH
F FWDREWINDPLAYSTOPRECORD
VARI PITCH
LOCATE ABS END