Filter
Top Products
D-160 Owner's Manual (Punch In/Out)
80
1-4. Undo/Redo of Auto Punch In/Out
* If you press the UNDO key after performing the auto punch in/out operation, the original sound
recorded prior to auto punch in/out will be restored.
* If you press the REDO key after undoing the auto punch in/out operation, the auto punch in/out
data will be restored.
<Note>
You can use the undo/redo functions while the D-160 is in stop mode.
Under the following circumstances, you will be unable to use the undo/redo functions;
1. If you make a new recording,
2. If you make a new edit (copy & paste, move & paste, or erase),
3. If the Auto Punch In point was passed in play or record mode while Auto Punch
mode was on, or
4. If you turned off the power to the D-160, then turned it back on.
5. If you use the Program Change function.
* When recording is finished, the Auto Punch mode will be canceled, and both
REHEARSAL and TAKE LEDs will go off.
REHEARSAL LED
TAKE LED
RECORD button LED
PLAY button LED
PLAY LED will light up
3
Blink
3
Light up
3
Blink
AUTO PUNCH IN point
AUTO PUNCH OUT point
Take mode (Auto Punch In/Out)
Only Track 3 enters INPUT monitoring
status. (Unlike in Rehearsal mode, the
D-160 will record data.)
All tracks are under REPRO
monitoring status.
Refer to "Caution after Punch
Out" for details.
All tracks are under REPRO
monitoring status.
PLAY LED will light up
RECORD LED will light up
TAKE LED will light up
TAKE LED will light up
Both LEDs will go off
RECORD TRACK display
PLAY LED will light up
<Caution after Punch Out>
At "Take" of punch out, the punch-in recording track will not immediately
enter the repro monitor mode from the input monitor mode but enter
the repro monitor mode about two seconds after mute playback.
This is a functional feature of D-160 and not a malfunction.
PLAY
PLAY
PLAY
RECORD