Filter
Top Products
E-10
3 Wiring
3.1 Terminal Layout
FX
3G
/FX
3U
/FX
3UC
PLC User's Manual - Analog Control Edition
FX3U-4DA (4-channel Analog Output)
3.1 Terminal Layout
The terminals of FX3U-4DA are arranged as follows:
3.2 Cable and Terminal Tightening Torque
The FX3U-4DA terminal block is designed for M3 screws.
The end disposal of the cable shown below.
Tighten the terminal to a torque of 0.5 N
•
m to 0.8 N
•
m.
• When one wire is connected to one terminal
• When two wires are connected to one terminal
24+
24-
VI-
I+
•
•
V+
VI-
•
V+
VI-
V+
V+
VI-
I+
I+
I+
Signal Application
Ground terminal
24V DC power supply
Channel-1 analog output
Channel-2 analog output
Channel-4 analog output
Channel-3 analog output
Do not connect any lines.
Do not connect any lines.
Do not connect any lines.
φ
3.2 (0.13")
6.2 mm (0.24")
or less
’[Žq
Terminal
screw
Crimp
terminal
Terminal
6.2 mm (0.24")
or less
φ
3.2 (0.13")
6.3 mm(0.25")
or more
6.3 mm(0.25")
or more
Terminal
screw
Crimp
terminal
Terminal
6.2 mm (0.24")
or less
6.2 mm (0.24")
or less
φ
3.2 (0.13")
φ
3.2 (0.13")