Filter
Top Products
About the Installation Roadmap and Task Lists
Issue 9.1 June 2006 127
For help with connecting to and logging in to the G700 or S8300, see About connection
methods on page 63.
Checklist 1: Install New G700 with an S8300 (Primary or LSP) with the Avaya
Installation Wizard
Major Tasks Subtasks
Installation Overview
on
page 138
- G700 components
- Software and firmware files
- Access to the Server CD
- Access to the S8300 and G700
Before Going to the Customer
Site on page 142
- Install TFTP Server or Obtain USB CD Drive
- Get planning forms
- Get the G700 serial number
- Check FTP server for backups
- Obtain service pack files, if needed
- If using IA770, obtain service pack and
language files, if needed
- If using IA770, obtain Ethernet interface IP
address and Subnet mask
- Complete the RFA process
- Obtain static craft password
Hardware installation for the
G700 Media Gateway and
S8300 Media Server on page 83
- On site checklist
- Unpack and check the order
- Install the G700
- Cable multiple units
- Attach ground conductors
Install the S8300
on page 149 - Insert the S8300
- Remaster the hard drive and install new CM
software, and IA770 software, if necessary
--Set time, date, and time zone
Configure the S8300 (See Using
the Avaya Installation Wizard
(IW) on page 161
- Import EPW
- Set usage option
- Set server identities
- Configure Stack Master/IP routes
- Configure optional services:
UPS
DNS
NTP
INADS
- Load Security files
- Install CM software
--Upload translations, if necessary
1 of 3