Filter
Top Products
Installing a new G700 with an S8300 using the Avaya Installation Wizard
156 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Software and firmware update reminder
When the installation is complete, the CD drive door opens and the system reboots
automatically. The reboot takes 1–3 minutes without the IA770 application, and much longer if
the IA770 is present.
In the event you used the laptop TFTP server and you have a problem with power and the
S8300 does not reboot, there are two methods of recovery:
● Use the USB CD-ROM to plug into the S8300 and repeat the remastering process using
the Server CD.
● Arrange access to another hard drive (comcode 700307028) should it be necessary to
perform the TFTP remaster procedure on it.
About the Avaya Installation Wizard
You can use the Avaya Installation Wizard (IW) to perform all of the following tasks:
● Configure the S8300 Media Server
● Configure the G700 Media Gateway
● Install new firmware on the G700
Configure the S8300 Media Server
The IW accomplishes the following tasks:
● Verifying software version
● Setting the media server’s time, date, and time zone
● Installing Communication Manager service pack files, if any
● Configuring the S8300 Media Server
● Configuring the Stack Master/IP routing