Filter
Top Products
Administer Communication Manager
Issue 9.1 June 2006 519
IP Network Region Screen
2. If necessary, complete the fields as described in ‘‘Administration for Network Connectivity
for Avaya Communication Manager, 555-233-504.’’
Note:
Note: It is strongly recommended to use the defaults in the screen. However, for the
RTCP Enabled and RSVP Enabled fields, the entry should be n (no).
3. Press F3 (Enter) to submit the screen.
Associating LSPs with Network Regions
If the primary controller has LSPs, you can associate each LSP with one or more network
regions. In the event of a network failure, IP telephones assigned to a network region will
register with an LSP associated with that region.
This procedure associates up to six LSPs with a network region.
To associate LSPs with a network region
1. On the IP Network Region screen, go to page 2.
change ip-network-region 1 Page 1 of 19
IP NETWORK REGION
Region: 1
Location: Home Domain:
Name:
Intra-region IP-IP Direct Audio: yes
MEDIA PARAMETERS Inter-region IP-IP Direct Audio: yes
Codec Set: 1 IP Audio Hairpinning? y
UDP Port Min: 2048
UDP Port Max: 3028 RTCP Reporting Enabled? n
RTCP MONITOR SERVER PARAMETERS
DiffServ/TOS PARAMETERS Use Default Server Parameters? y
Call Control PHB Value: 34
Audio PHB Value: 46
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
Audio 802.1p Priority: 6 AUDIO RESOURCE RESERVATION PARAMETERS
H.323 IP ENDPOINTS RSVP Enabled? n
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5