Filter
Top Products
Administer Communication Manager
Issue 9.1 June 2006 579
To assign LSPs to a network region
1. On the IP Network Region screen, go to page 2.
IP Network Region Screen, page 2
2. Enter the names of up to six LSPs to be assigned to region 1.
The LSP names must be the same as administered on the Node Names form.
3. Submit the form.
4. Repeat for each network region to which you want to assign LSPs.
Administering IP Interfaces
To define the IP interfaces of the S8400, S8500, or S8700-series port network CLAN
boards
Note:
Note: This should have already been established as a part of normal S8400, S8500, or
S8700-series Media Server installation.
1. Type change ip-interfaces <slot location> to open the IP Interfaces screen.
change ip-network-region 1 Page 2 of 19
IP NETWORK REGION
INTER-GATEWAY ALTERNATE ROUTING
Incomming LDN Extension:
Conversion to Full Public Number - Delete: Insert:
Maximum Number of Trunks to Use:
LSP NAMES IN PRIORITY ORDER SECURITY PROCEDURES
1 node-10-LSP_____ 1 challenge
2 ________________ 2
3 ________________ 3
4 ________________ 4
5 ________________ 5
6 ________________ 6