Filter
Top Products
Upgrading the S8300A
Issue 9.1 June 2006 629
Copying files to the S8300
During reformatting of the hard drive, a new directory, /var/home/ftp/pub, was created. For
release 2.0 and later, this pub directory will be used as the /var/home/ftp directory that was used
in previous releases.
You must copy the remaining required files to the pub directory on the S8300 hard drive. This
includes, but is not limited to:
● the post-upgrade service pack file
● License file
● Avaya authentication file (if needed)
● New firmware files
Note:
Note: If you are copying a license file or authentication file, be sure the /var/home/ftp/
pub directory contains no files with a *.pwd or *.lic extension. There should be
only one of each of these file types this directory. If any of these file types exist in
the pub directory, move, rename, or delete them before you copy the new files.
To copy files to the S8300
1. Log on to Integrated Management and launch the Maintenance Web Interface.
Note:
Note: Since the system is now running a new software release, you must login with the
initial craft ID and password. (You cannot use dadmin at this point.)
2. Under Miscellaneous click Download Files.
The Download Files screen displays.