Avaya S8300 Home Theater Server User Manual


 
Installing a new G700 without an S8300 using the Gateway Installation Wizard
214 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
IP Network Region Screen
2. Complete the fields as described in Administration for Network Connectivity for Avaya
Communication Manager, 555-233-504.
Note:
Note: It is strongly recommended to use the defaults in the screen. However, for the
RTCP Enabled and RSVP Enabled fields, the entry should be n (no).
3. If the network region of the G700 (1 in this example) is different from that of the S8400,
S8500, or S8700-series CLAN board(s), you must interconnect the two regions.
Press NextPage twice to display page 3, of the Inter Network Region Connection
Management screen.
This screen shows the source region (1) and the first 15 destination network region
numbers. (Pages 4–19 show destination regions 16–250).
change ip-network-region 1 Page 1 of 19
IP NETWORK REGION
Region: 1
Location: Authoritative Domain:
Name:
MEDIA PARAMETERS Intra-region IP-IP Direct Audio: yes
Codec Set: 1 Inter-region IP-IP Direct Audio: yes
UDP Port Min: 2048 IP Audio Hairpinning? y
UDP Port Max: 3048
DiffServ/TOS PARAMETERS RTCP Reporting Enabled? n
Call Control PHB Value: 34 RTCP MONITOR SERVER PARAMETERS
Audio PHB Value: 46 Use Default Server Parameters? y
Video PHB Value: 26
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
Audio 802.1p Priority: 6
Video 802.1p Priority: 5 AUDIO RESOURCE RESERVATION PARAMETERS
H.323 IP ENDPOINTS RSVP Enabled? n
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5