Filter
Top Products
5 - 6
5 Dedicated Options
MITSUBISHI CNC
2) Mitsubishi serial signal output scale
< When using MDS-D/DH-V2 >
The FB signal of the linear scale is divided to each axis control inside 2-axis drive unit. An external
option unit is not required.
< When using two units of MDS-D/DH-V1 >
The FB signal of the linear scale is divided to each drive unit with the signal division unit (MDS-B-
SD).
MDS-D/DH-V2
Linear scale
( Mitsubishi serial signal output )
Secondary axis
Primary axis
(Note) The conversion unit of the scale manufacturer is included.
MDS-D/DH-V1
MDS-D/DH-V1
(Secondary axis)
Primary axis)
Linear scale
( Mitsubishi serial signal outpu )
(Note) The conversion unit of the scale manufacturer is included.
Detector division unit
Secondary axis
Primary axis