Filter
Top Products
Appendix 6 Instruction Manual for Compliance with UL/c-UL
MITSUBISHI CNC
Appendix 6 - 4
TE1 (L1, L2, L3, )
(Note) 75 °C:Grade heat-resistant polyvinyl chloride insulated wires (HIV).
Use copper wire only.
Above listed wire are for use in the electric cabinet on machine or equipment.
(2) Spindle Drive Unit (MDS-D/DH-SP/SP2, MDS-D-SPJ3)
TE2 (L+, L-)
Wire size depends on the Power Supply Unit (MDS-D/DH-CV Series).
TE3 or CNP2 (L11, L21)
TE1 (U, V, W, )
Unit Type
MDS-D-CV- 37 --- 75 110 185
MDS-DH-CV- 37, 75 110 --- 185 ---
Wire Size (AWG)
/Temp Rating
Note 1
#14
/75°C
#12
/75°C
#10
/75°C
#8
/75°C
#6
/75°C
Crimping Terminals Type R2-4 R5.5-5 5.5-S4 R8-5 R14-5
Crimping Tools Type YHT-2210 <- <- YPT-60-21 <-
Unit Type
MDS-D-CV- --- --- 300 370, 450 550
MDS-DH-CV- 300 370, 450 550 750 ---
Wire Size (AWG)
/Temp Rating
Note 1
#6
/75°C
#4
/75°C
#2
/75°C
#1/0
/75°C
#3/0
/75°C
Crimping Terminals Type
Crimping Tools Type
R14-8 R22-8 38-S8 60-S8 80-10
YPT-60-21 <- <- <- YPT-150-1
Unit Type
MDS-D-SP(#)- 160 to 200 240 to 320 400 to 600 --- --- ---
MDS-D-SPJ3(#)- --- --- --- 22, 37(##) 22(##) 55(##) to 110(##)
MDS-DH-SP(#)- 100 to 160 200 to 480 --- --- --- ---
Terminal
Screw
Size
TE2 (L+, L-)
Torque [lb in/ N m]
M6 M6 M10 --- --- ---
35.4/4.0 <- 97.3/11.0 --- --- ---
TE3 (L11, L21)
Torque [lb in/ N m]
M4 M4 M4 --- --- M3.5
10.6/1.2 <- <- --- --- <-
TE1 (L1, L2, L3, )
Torque [lb in/ N m]
M5 M8 M10 --- --- M4
17.7/2.0 53.1/6.0 97.3/11.0 --- --- 17.7/2.0
CNP1 (L1,L2,L3,N,P1,P2)
and CNP3 (U,V,W))
Torque [lb in/ N m]
--- --- --- --- --- ---
--- --- --- 5.3/0.6 --- ---
Unit Type
MDS-D/DH-SP(#)-
20 to 640 ---
MDS-D-SPJ3(#)-
55(##) to 110(##) 075(##) to 37(##)
Wire Size (AWG)
/Temp Rating
Note 1
#14
/75°C
#14
/60 or 75°C
Crimping Terminals Type R2-4 ---
Crimping Tools Type YHT-2210 ---
Unit Type
MDS-D-SP(#)-
20, 40 80 160 --- 200
MDS-DH-SP(#)-
20, 40 80 100 --- 160
Wire Size (AWG)
/Temp Rating
Note 1
#14
/75°C
#12
/75°C
#10
/75°C
#8
/75°C
#6
/75°C
Crimping Terminals Type --- --- R5.5-5 R8-5 R14-5
Crimping Tools Type --- --- YHT-2210 YPT-60-21 <-
Unit Type
MDS-D-SP(#)-
240 --- 320 400 640
MDS-DH-SP(#)-
200 320 480 --- ---
Wire Size (AWG)
/Temp Rating
Note 1
#4
/75°C
#2
/75°C
#1/0
/75°C
#2/0
/75°C
#3/0
/75°C
Crimping Terminals Type R22-8 38-S8 60-S8 70-10 80-10
Crimping Tools Type YPT-60-21 YPT-60-21 <- YPT-150-1 <-