Filter
Top Products
2 Specifications
MITSUBISHI CNC
2 - 22
< SJ-V Series (Standard) >
(Note) The tolerable radial load is the value calculated at the center of output shaft.
Spindle motor type SJ-V7.5-01ZT SJ-V7.5-03ZT SJ-V11-01ZT SJ-V11-13ZT SJ-V15-01ZT
Compatible
spindle drive
unit type
MDS-D-SP- 160 160 160 200 200
MDS-D-SP2-
16080S (L)
16080 (L)
16080S (L)
16080 (L)
16080S (L)
16080 (L)
--
Output
capacity
Continuous rating [kW] 5.5 5.5 7.5 7.5 11
Short time rating [kW]
7.5
(30-minute rating)
7.5
(30-minute rating)
11
(30-minute rating)
11
(30-minute rating)
15
(30-minute rating)
Power facility capacity [kVA] 13.4 13.4 19.6 19.6 26.7
Base rotation speed [r/min] 1500 1500 1500 1500 1500
Maximum rotation speed [r/min] 12000 12000 8000 8000 8000
Frame No. A112 A112 B112 B112 A160
Continuous rated torque [N•m] 35 35 47.7 47.7 70
GD
2
[kg•m
2
]
0.098 0.098 0.12 0.12 0.23
Inertia [kg•m
2
]
0.0245 0.0245 0.03 0.03 0.0575
Tolerable radial load [N] 980 980 1960 1960 2940
Cooling fan
Input voltage 3-phase 200V 3-phase 200V 3-phase 200V 3-phase 200V 3-phase 200V
Maximum power
consumption
40W 40W 40W 40W 63W
Environment
Ambient temperature Operation: 0 to 40°C (with no freezing), Storage: -20°C to 65°C (with no freezing)
Ambient humidity Operation: 90%RH or less (with no dew condensation), Storage: 90%RH or less (with no dew condensation)
Atmosphere Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist, or dust
Altitude
Operation: 1000 meters or less above sea level, Storage: 1000 meters or less above sea level,
Transportation: 10000 meters or less above sea level
Degree of protection IP44
Flange size [mm] 204 SQ. 204 SQ. 204 SQ. 204 SQ. 250 SQ.
Total length (excluding shaft) [mm] 440 440 490 490 469.5
Flange fitting diameter [mm] φ180 φ180 φ180 φ180 φ230
Shaft diameter [mm] φ32 φ32 φ48 φ48 φ48
Mass [kg] 60 60 70 70 110
Heat-resistant class F (155°C)
For outline dimension drawings, refer to "DRIVE SYSTEM DATA BOOK" (IB-1500273(ENG)).