Filter
Top Products
2 Specifications
MITSUBISHI CNC
2 - 50
2-4 Drive unit
2-4-1 Installation environment conditions
Common installation environment conditions for servo, spindle and power supply unit are shown below.
Environ-
ment
Ambient temperature Operation: 0 to 55°C (with no freezing), Storage / Transportation: -15°C to 70°C (with no freezing)
Ambient humidity
Operation: 90%RH or less (with no dew condensation)
Storage / Transportation: 90%RH or less (with no dew condensation)
Atmosphere
Indoors (no direct sunlight)
With no corrosive gas, inflammable gas, oil mist, dust or conductive fine particles
Altitude Operation/Storage: 1000 meters or less above sea level, Transportation: 13000 meters or less above sea level
Vibration/impact
4.9m/s
2
(0.5G) / 49m/s
2
(5G)