Filter
Top Products
2 Specifications
MITSUBISHI CNC
2 - 30
(2) 400V series
< SJ-4-V Series (Standard) >
(Note 1) The rated output is guaranteed at the rated input voltage (380 to 440VAC 50Hz / 380 to 480VAC 60Hz)
to the power supply unit. If the input voltage fluctuates and drops below 380VAC, the rated output may
not be attained.
(Note 2) The tolerable radial load is the value calculated at the center of output shaft.
Spindle motor type SJ-4-V2.2-03T SJ-4-V3.7-03T SJ-4-V5.5-07T SJ-4-V7.5-12T SJ-4-V11-18T SJ-4-V15-18T
Compatible
spindle drive
unit type
MDS-DH-SP- 20 40 80 100
Output
capacity
Continuous rating [kW] 1.5 2.2 3.7 5.5 7.5 11
Short time rating [kW]
2.2
(15-minute
rating)
3.7
(15-minute
rating)
5.5
(30-minute
rating)
7.5
(30-minute
rating)
11
(30-minute
rating)
15
(30-minute
rating)
Power facility capacity [kVA] 4.1 6.7 9.9 13.4 19.6 26.7
Base rotation speed [r/min] 1500
Maximum rotation speed [r/min] 10000 8000 6000
Frame No. A90 B90 D90 A112 B112 A160
Continuous rated torque [N•m] 9.5 14.0 23.5 35.0 47.7 70.0
GD
2
[kg•m
2
]
0.027 0.035 0.059 0.098 0.12 0.23
Inertia [kg•m
2
]
0.007 0.009 0.015 0.025 0.03 0.06
Tolerable radial load [N] 980 1470 1960 2940
Cooling fan
Input voltage Single-phase 400V 3-phase 400V
Maximum power
consumption
30W 70W 72W
Environment
Ambient temperature Operation: 0 to 40°C (with no freezing), Storage: -20°C to 65°C (with no freezing)
Ambient humidity Operation: 90%RH or less (with no dew condensation), Storage: 90%RH or less (with no dew condensation)
Atmosphere Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist, or dust
Altitude
Operation: 1000 meters or less above sea level, Storage: 1000 meters or less above sea level,
Transportation: 10000 meters or less above sea level
Degree of protection IP44
Flange size [mm] 174 SQ. 174 SQ. 174 SQ. 204 SQ. 204 SQ. 250 SQ.
Total length (excluding shaft) [mm] 300 330 425 440 490 469.5
Flange fitting diameter [mm] φ150 φ150 φ150 φ180 φ180 φ230
Shaft diameter [mm] φ28 φ28 φ28 φ32 φ48 φ48
Mass [kg] 25 30 49 60 70 110
Heat-resistant class F (155°C)
For outline dimension drawings, refer to "DRIVE SYSTEM DATA BOOK" (IB-1500273(ENG)).