Filter
Top Products
Appendix 1 - 17
MDS-D/DH Series Specifications Manual
Appendix 1-4 Connector outline dimension drawings
Appendix 1-4 Connector outline dimension drawings
Appendix 1-4-1 Connector for drive unit
Optical communication cable connector
(Note 1) The POF fiber's light amount will drop depending on how the fibers are wound. So, try to avoid
wiring the fibers.
(Note 2) Do not wire the optical fiber cable to moving sections.
(Note 1) The PCF fiber's light amount will drop depending on how the fibers are wound. So, try to avoid
wiring the fibers.
(Note 2) Do not wire the optical fiber cable to moving sections.
For wiring between NC and drive unit
Refer to the instruction manual for CNC.
Optical communication connector
For wiring between drive units (inside
panel)
Manufacturer: Japan Aviation Electron-
ics Industry
<Type>
Connector:2F-2D103
[Unit:mm]
Cable appearance
<Type>
Connector: 2F-2D103 (Japan Aviation
Electronics Industry)
Optical fiber: ESKA Premium
(MITSUBISHI RAYON)
For wiring between drive units (outside
panel)
Manufacturer: Tyco Electronics
<Type>
Connector: 1123445-1
[Unit:mm]
Cable appearance
<Type>
Connector: 1123445-1
(Tyco Electronics)
Optical fiber: ESKA Premium
(MITSUBISHI RAYON)
(13.4)
(15)
(6.7)
(
20.9
)
8
+0
37.65
(2.3)
(1.7)
㧔L҇0.1 㧕
㧔L҈0.2 㧕
m
m
22.7
8.5 20.3