Filter
Top Products
MDS-D/DH Series Specifications Manual
2-1 Servomotor
2 - 5
< HP Series >
(Note 1) The above characteristics values are representative values. The maximum current and maximum
torque are the values when combined with the drive unit.
(Note 2) Use the HP motor in combination with the MDS-D Series drive unit compatible with the 200VAC input.
This motor is not compatible with the conventional MDS-B/C1/CH Series.
(Note 3) The total length will be 3.5mm longer when using an A51 or A74N detector.
Servomotor type
HP Series
ABS specifications: HP□ -A74N/ -A51/ -A48
HP354 HP454 HP704 HP903 HP1103
Compatible
servo drive
unit type
MDS-D-V1- 160 160 160W 320 320W
MDS-D-V2-
16080 (L)
160160 (L,M)
160160W (L,M)
16080 (L)
160160 (L,M)
160160W (L,M)
160160W (L,M) - -
Continuous
characteris-
tics
Rated output [kW] 3.5 4.5 7.0 9.0 11.0
Rated current [A] 15.2 14.2 19.2 22.2 25.2
Rated torque [N•m] 11.1 14.3 22.3 28.7 35.0
Stall current [A] 31.0 32.0 42.0 54.0 79.0
Stall torque [N•m] 22.5 31.9 49.0 70.0 110.0
Power facility capacity [kVA] 6.4 8.1 12.5 16.1 19.6
Rated rotation speed [r/min] 3000
Maximum rotation speed [r/min] 4000 3000
Maximum current [A] 116.0 116.0 116.0 172.0 212.0
Maximum torque [N•m] 66.0 95.0 120.0 170.0 260.0
Power rate at continuous rated torque
[kW/s]
33.0 36.0 59.0 52.0 48.0
Motor inertia [kg•cm
2
]
37.0 55.0 82.0 163.0 255.0
Motor inertia with brake [kg•cm
2
]
42.5 60.5 87.5 187.0 279.0
Maximum motor shaft conversion load
inertia ratio
High-speed, high-accuracy machine: 3 times or less of motor inertia
General machine tool (interpolation axis): 5 times or less of motor inertia
General machine (non-interpolation axis): 10 times or less of motor inertia
Motor side detector
Resolution per motor revolution
A74N: 16,000,000pulse/rev, A51: 1,000,000 pulse/rev, A48: 260,000 pulse/rev
Degree of protection IP67 (The shaft-through portion is excluded.)
Environment
Ambient temperature
Operation: 0 to 40°C (with no freezing),
Storage: -15°C to 70°C (with no freezing)
Ambient humidity
Operation: 80%RH or less (with no dew condensation),
Storage: 90%RH or less (with no dew condensation)
Atmosphere Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist, or dust
Altitude
Operation: 1000 meters or less above sea level,
Storage: 10000 meters or less above sea level
Vibration
X:24.5m/s
2
(2.5G) Y:29.4m/s
2
(3G) X,Y:9.8m/s
2
(1G)
Flange size [mm] 180 SQ. 180 SQ. 180 SQ. 220 SQ. 220 SQ.
Total length (excluding shaft) [mm] 195.5 225.5 305.5 346.5 419.5
Flange fitting diameter [mm] φ114.3 φ114.3 φ114.3 φ200 φ200
Shaft diameter [mm] φ35 φ35 φ35 φ55 φ55
Mass Without / with brake [kg] 17.0/22.0 21.0/26.0 37.0/43.0 51.0/61.4 74.0/84.4
Heat-resistant class F (155°C)
For outline dimension drawings, refer to "DRIVE SYSTEM DATA BOOK" (IB-1500273(ENG)).