Filter
Top Products
Date of revision Manual No.
Revision details
Mar. 2011 IB(NA)1500875-D
- "FCU6- BTBOX- 36" was replaced by "MDS- BTBOX- 36".
- "System configuration" in "Converged battery option" was revised.
- "Spindle options" was revised.
- "(MITSU02-4)" was added to EIB192M and EIB392M.
- ADB- 20J60 was added.
- "Optical communication repeater unit (FCU7- EX022)" was revised.
- "Cable connection diagram" was revised.
- "List of cable and connectors" was revised.
- The values of M side were added to "Example of wires".
- "Selection of circuit protector and contactor" was revised.
- "Relay" was revised.
- "Selection of the servomotor" was revised.
- "Cable and Connector Specifications" was revised.
- "Compliance to EC Directives" was revised.
- "EMC Installation Guidelines" was revised.
- "EC Declaration of Conformity" was revised.
- "Instruction Manual for Compliance with UL/c- UL Standard" was revised.
- Miswrite is corrected.
Jan. 2012 IB(NA)1500875-E
- "Introduction" was revised.
- "Handling of our product" was added.
- "HF*-A74" and "HP*-A74" were replaced by "-A74N".
- "OSA105-ET2" was replaced by "OSA105ET2".
- "OSA166-ET2" was replaced by "OSA166ET2N".
- "Servomotor type", "Servo drive unit type", "Spindle motor type" and "Tool
spindle motor type" were revised.
- Specifications lists in "Servomotor", "Spindle motor" and "Tool spindle motor"
were revised.
- "Explanation of each part" was revised.
- Function specifications list was revised.
- "Power regen eration control", "Resistor regeneration control", "Fan stop
detection", "Open-phase detection", "Contactor weld detection" and "Power
supply voltage display function" were added in "Function specifications".
- "High frequency current control" was deleted
- "Installation of servo motor" was revised.
- Overload protection characteristics for HF104, HF204, HF354, HP54, HP104,
HP903, HP1103, HF-H104, HP-H54, HP-H903 and HP-H1103 were revised.
- "Machine accuracy" and "Installation of spindle motor" were added in "Spindle
motor".
- "Servo options" and "Spindle options" were revised.