Filter
Top Products
5 - 18
5 Dedicated Options
MITSUBISHI CNC
< MDS-BTBOX-36 >
(a) MDS-D/DH-V1/V2 Series connected in serial
1.24V power for DO output must always be turned ON before the NC power input.
2. Spindle drive unit has no battery voltage drop warning function. Wiring to CN9 of drive unit must be
always connected to servo drive unit.
3. The total length of battery cable (from the battery unit to the last connected drive unit) must be 3m
or less.
L+
L-
BTA
BTB
1 2
1 2 1 2
CN9
BTB BTB BTA
DG23
DG22
DG24
+24V
RG
DOCOM
DO(ALM)
LG
+5V
LG
BT
MDS-BTBOX-36
(MDS-D/DH-V1) (MDS-D/DH-V2) (MDS-D/DH-SP) (MDS-D/DH-CV)
1-axis servo
drive unit
Spindle
drive unit
Power supply
unit
BT1 For cell battery
Connect the battery unit with BTA or BTB.
Connect either the battery unit or the cell battery.
I/O power
Servo drive unit
Battery connector connection part magnified figure
Servo motorServo motor
2-axis servo
drive unit
From NC
Battery box
Connector for
connecting
battery unit
CAUTION