Filter
Top Products
COMMAND LINE INTERFACE
Command Summary
350-8697 DGy Model 201 User Guide 96
. . . . .
. . . . . . . . .
IMAGE COMMANDS
A summary of DGy 201 image commands is listed below.
Table 6-3. Image Commands Summary
Command Description
BRIghtness Sets brightness value of the analog RGB input or optional composite video
input.
CONTrast Sets contrast value of the analog RGB input or optional composite video input
HUE Sets hue value of the optional composite video input.
SATuration Sets the saturation (color contrast) value of the optional composite video input.
IMAGE COMMANDS DESCRIPTIONS
The table below lists all DGy 201 image commands, their arguments and
detailed descriptions.
TiMingLISTLOAD <100 ...160> <name>
<hfp> <hs> <hbp>
<hact> <vfp> <vs>
<vbp> <vact> <hfreq>
<sync> <hpol> <vpol>
<il>
This command is used to create and save a user
timing set to the timing list.
User defined entries may be saved to the list using
timing list slots 100 - 160 (Timing slots 1 - 99 are
reserved for factory defined timing settings).
The name parameter is a name that is used to
identify the timing set (for example mytiming3).
hfp - width of the horizontal front porch (pixels)
hs - width of the horizontal sync pulse (pixels)
hbp - width of horizontal back porch (pixels)
hact - width of the active picture area (pixels)
vfp - width of the vertical front porch (pixels)
vs - width of the vertical sync pulse (pixels)
vbp - width of vertical back porch (pixels)
vact - height of the active picture area (pixels)
hfreq - horizontal frequency (Hz)
sync - type of sync signal (analog 3, 4 or 5 wire)
hpol - polarity of horizontal sync pulse (0=negative)
vpol - polarity of vertical sync pulse (0= negative)
il - interlace (0 = non interlace, 1 = interlace)
Table 6-2. Input Commands (Continued)
Command Arguments Description