Filter
Top Products
COMMAND LINE INTERFACE
Command Summary
350-8697 DGy Model 201 User Guide 124
. . . . .
IPSubNET ddd.ddd.ddd.ddd Sets the system Subnet Mask.
Use theSYStemReSet command to reboot the unit
to activate the new IP subnet mask.
Factory default: 255.255.255.000
IPGateWay ddd.ddd.ddd.ddd Sets the system default gateway.
Use theSYStemReSet command to reboot the unit
to activate the new IP gateway.
MACADDRess (none) Reports the physical Ethernet (Media Access
Controller) address.
RestoreFactoryDefaults (none) Restores all user settings to their factory default
values.
SYStemReSet (none) Causes DGy to reboot. This command allows the
system firmware to be restarted without having to
use the front panel power switch.
TestPattern <CBAR | BOX |
RAMP | PRBS |
GRATE | OFF>
This command selects which internal Test Pattern
is displayed or turns the test pattern generator off.
Test patterns include:
CBAR - 100% color bars
BOX - a box indicating the extent of the output
image
RAMP - a horizontal luminance ramp
PRBS - a test sequence for the DVI output
GRATE - an fs/2 vertical grate
Factory default: OFF
UpdateFirmWare (none) This command updates the firmware for the
DGy.The firmware file must be transferred to the
DGy 201 using FTP prior to using this command.
See
Appendix C, Firmware Upgrade on page 147
for more details.
Table 6-15. Miscellaneous Commands (Continued)
Command Arguments Description