Filter
Top Products
OPERATIONS
In This Chapter
350-8697 DGy Model 201 User Guide 25
. . . . .
LAUNCHING THE
SIMULTANEOUS
. . . . . . . . .
RECORD/PLAYER
If the optional Simultaneous Record/Player is installed in your DGy 201
then you can choose between using the standard Record/Player, or the
simultaneous Record/Player. By default the standard Record/Player is
loaded automatically.
If you want to use the Simultaneous Record/Play feature (option) you
will have to use the WCP Simultaneous Record/Play control panel. This
is accessed from the WCP Configuration page shown in
Figure 3-1.
Figure 3-1. WCP Configuration Page
Click the “Simultaneous Mode” button to open the WCP Simultaneous
Record/Play control panel.
Hint If you are in the “Simultaneous” mode, the mode
selection button will be labeled “Standard”. To switch
to the Standard record/play mode in the WCP
Configuration page click on the “Standard” mode
button.
You must close any open WCP option pages (Play,
Record, Input ...) before the new Simultaneous
Record/Play control panel can open.