Filter
Top Products
COMMUNICATIONS SETUP
Serial Communications
350-8697 DGy Model 201 User Guide 141
. . . . .
4. Click OK to display the COM Properties Dialog.
Figure B-4. COM Properties Dialog (Sample)
5. Configure your PC to match DGy 201’s pre-configured factory
settings, as follows:
~ Bits per second (baud): 115,200 (default)
~ Data bits: 8
~ Parity: None
~ Stop bits: 1
~ Flow control: XOn / XOff
DGy 201 can be configured to operate at baud rates from 9600
baud to 115 kbaud. The recommended baud rate is 115 kbaud
(default baud rate). In Chapter 6, refer to the “Command Set
List” page 90 section for details about changing baud rates.
6. Click OK to display the Hyperterminal window.
7. In Chapter 2, please continue with the “Installation” section
(page 17).