RGB Spectrum 201 DVR User Manual


 
FIRMWARE UPGRADE
Automated Update Procedure
350-8697 DGy Model 201 User Guide 151
. . . . .
FIRMWARE UPDATE
. . . . . . . . .
PROCEDURE
Use the following steps to transfer the firmware from your local computer to
the DGy 201 chassis.
Step 1. If not already selected, click the Update Firmware radio button
to display the options as shown in the figure below.
Figure C-4. DGy 201 FTP Update Firmware Box
Step 1. Enter the IP address of the DGy 201 in the IP address entry box
on the right side of the Add button.
Step 2. Click the Add button to add the IP address of the DGy 201 to
the IP Address List on the left side of the window
.
Figure C-5. DGy 201 FTP Update Firmware IP Address List
Step 3. Click on the Browse button to navigate to the folder where you
downloaded the firmware upgrade file (see
Figure C-6 below).
Alternatively if you know the path name you can type this
directly into the Pathname entry box or drag and drop the file
onto this area.