RGB Spectrum 201 DVR User Manual


 
COMMAND LINE INTERFACE
Command Summary
350-8697 DGy Model 201 User Guide 107
. . . . .
SYNChronizedSTOP (none) This command modifies the behavior of PLAY. If
PLAYLOOP is OFF then PLAY plays its clip (or
list of clips) once, then stops. If
PLAYLOOP is
ON, PLAY plays the listed clip(s) in a loop until
STOP is issued.
Factory default: OFF
PLAYLOOP <ON | OFF> List information about any queued synchronized
command. See
SYNChronizedPLAY and
SYNChronizedRECord.
PLAYSPeeD [-100.0 ... 100.0 ] This command sets the DGy 201 play speed.
PLAYSPeeD = 1.0 represents normal speed in the
forward direction.
Positive PLAYSPeeD values represent playback in
the forward direction.
To play in fast forward use a positive value of
PLAYSPeeD greater than 1.0
To play in slow motion, use a positive value
between 1.0 and 0.0
Negative PLAYSPeeD values represent playback
in reverse.
To play in fast reverse use a negative value greater
than -1.0
To play in slow reverse use a negative value
between -1.0. and 0.0.
Example: Set the play speed for 8 times normal in
the reverse direction.
PLAYSPD -8.0
Example: Set the play speed for 1/10 normal
speed in the forward direction.
PLAYSPD 0.1
Default: 1.0
PAUSE (none) In Playback mode, this command (with no
argument) pauses playback. Playback resumes
when you send the
Play command.
In Record mode, this command (with no argument)
pauses record. Record resumes when you sent the
Record command.
FrameNext (none) Advances to the next frame of a paused clip
FramePrevious (none) Setps back to the pervious frame of a paused clip
STOP (none) This command cancels the Play, Pause, and
Record recorder functions.
Table 6-10. DGy 201 Play and Record Commands (Continued)
Command Arguments Description