RGB Spectrum 201 DVR User Manual


 
COMMAND LINE INTERFACE
Command Summary
350-8697 DGy Model 201 User Guide 115
. . . . .
UNPROTECTCLIP <clipname> Removes write protection from named clip.
Clipname can contain Unix style wild cards,
and may be used to specify multiple clips.
RealTimeSeek <yyyymmddhhmmss[xxx]
>
The RealTimeSeek command cues the DGy to
the specified real time recording time within the
current clip. The time argument can be
provided with resolution in seconds, or in
milliseconds by adding the final three digits
(xxx) at the end of the RealTimeSeek
argument.
TimeCodeQuery [F | H] The TCQ command returns the timecode of
the current clip position. This command is valid
in PLAY or PLAY PAUSE modes only. When
used with the F argument, the
TCQ command
returns the relative frame number. When used
with the H argument the TCQ command
returns the time code with resolution in
milliseconds.
CD <dirname> Changes to a new directory on the current
drive. Relative or absolute pathnames are
allowed.
The path name to the removable disk is /
remov/
The path name to the (optional) fixed disk is /
fixed/
Use the PWD command to report your current
directory and drive
Example:
If you are currently using the fixed drive and
wish to change to the directory “myclips” on the
removable drive use the following command:
cd /remov/myclips
DELeteDIR <dirname> Removes the named (empty) directory.
Relative or absolute pathnames are allowed.
MKDIR <dirname> Makes a new directory. Relative or absolute
pathnames are allowed.
Example:
Create the directory “myclips”
mkdir myclips
PWD (none) Gives the absolute path of the current
directory.
CHecKFIXEDDISK (none) Executes a utility to detect and repair file
problems on the optional fixed disk.
CHecKREMOVABLEDIS
K
(none Executes a utility to detect and repair file
problems on the removable disk.
Table 6-12. Files System Commands(Continued)