Filter
Top Products
350-8697 DGy Model 201 User Guide 84
5
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PC SOFTWARE PLAYER
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IN THIS CHAPTER
This chapter provides installation information for the DGy 201 PC
software player plug in for the standard Windows Media Player (version
9 or later).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PC SOFTWARE PLAYER
The DGy 201 encodes the input images using the standard JPEG 2000
compression standard. Files recorded on the DGy 201 can be played on
a PC player running the Windows operating system. This is
accomplished by using a plug in for the standard Windows Media Player
version 9 or later. You will find a copy of the plug in provided on the CD
ROM manual that was included with your DGy 201 . The plug in is
installed using the common Install shield method which is described in
the next section.
INSTALLING THE
. . . . . . . . .
JPEG 2000 PLUG IN
Use the following procedure to install the JPEG 2000 plug in for the
Windows Media Player.
Step 1. Open the CD which contains the DGy Basic PC Player software
Step 2. Double click on the DGy PC Player Software Setup icon. This
will launch the familiar InstallShield Wizard.
Step 3. Follow the prompts to load the software onto your system.
Step 4. Copy the Simulator Sample file to a folder on your PC’s hard
drive.
Step 5. Launch Windows Media Player.
Step 6. From the Media Player File, choose Open, then select All Files
*.*. Then navigate to the folder which contains the sample files.
Step 7. Click on the Simulator Sample file and Click OK.