Filter
Top Products
Important Recordings can only be started when the DGy 201
player is in the Stop mode. Pause mode will not work.
As soon as the recording has commenced you can
use the Play function independently of the recorder.
OPERATIONS
WCP Simultaneous Record/Player Controls
350-8697 DGy Model 201 User Guide 27
. . . . .
1) Record Disk Status
This region indicates the selected disk drive and the amount of
disk space remaining in H:M:S (hour:minutes:seconds) format.
2) Select Record Disk
Click the Select Record Disk label to choose the fixed or
removable disk drive for recording. Information for the selected
disk appears in the adjacent Record Disk Status area.
3) Record Disk Capacity Indicator Bar
This bar visually indicates the available record time on the
selected disk drive. The solid white area represents the time
remaining, as a percentage of the whole.
4) Record Pause
Click Record Pause to pause a recording. The symbol
appears in the status area. To resume recording click on the
Record or Pause button.
5) Record
Note: You cannot start a recording if you are currently in
playback mode. Click on the Player Stop button in the WCP
Player Control Panel (Figure 3-3
) prior to clicking the Record
button. Only clicking Player Pause is not enough.
The recording will use the parameters established on the
Record Tab in the Options Dialog (page 46
).
The recording will be stored using the Record Clip Name and
Record Clip Path. See below for details.
The
symbol appears in the status area. When recording
begins, the DGy 201 records the visuals from the graphics input
port.
If the clip is new, recording begins immediately. If the clip has
already been recorded, you will be asked to confirm to overwrite
the clip.
6) Record Clip Name
This area indicates the name of the clip you are currently
recording. Click the Record Clip Name label to display the
Record Clip Browser Dialog, which enables you to select clips
for playback or recording. Refer to the “Clip Browser Menu
”
section (page 39) for details.