RGB Spectrum 201 DVR User Manual


 
OPERATIONS
WCP Simultaneous Record/Player Controls
350-8697 DGy Model 201 User Guide 33
. . . . .
14) Fast Forward
There are a total of five fast forward speeds as shown below:
~ x 2
~ x 4
~ x 8
~ x 16
~ x 32
To select the fast forward mode use the following procedure:
~ Select the clip that you want to play (Click on the Clip
Name label and select a clip from the clip dialog menu)
~ Click the Play button
~ Click the Fast Forward button
~ If you want to play at a faster speed click again on the
Fast Forward button
To return to normal (1x) playspeed immediately from any
playspeed click on the Play button.
If you pause playback while in the fast forward mode, clicking on
Pause again will continue in fast forward at the previously
selected speed.
If you select Fast Reverse while in the fast forward mode, the
DGy 201 will reverse direction at the lowest reverse speed.
Note that pressing the Stop button will cause Play to stop and
also cancel the fast forward speed setting.
15) Next Clip
Click the Next Clip button to move to the clip subsequent to the
clip currently selected. This command is active only when in the
Play or Pause modes, and is inactive in the Stop mode.
~ Clicking the Next Clip button in the Play mode causes
DGy 201 to cue to the beginning of the next clip in the
clip list (see
Clip Browser Menu) and automatically
enter the Pause mode. To begin playback click on the
Play or Pause buttons.
~ Clicking the Next Clip button in the Pause mode
causes DGy 201 to cue to the beginning of the next clip
in the clip list (see
Clip Browser Menu). To begin
playback click on the Play or Pause buttons.
16) Goto Previous Mark
After you have entered some Event Marks in the Event list (see
Set Mark
in the following section), you can use the Prev and
Next mark buttons.
Click Prev to cue to the previous event mark.