Filter
Top Products
OPERATIONS
Options Menu
350-8697 DGy Model 201 User Guide 61
. . . . .
The Info Tab provides information about the DGy 201 including:
• Product ID
• Firmware version
• WCP version
• Serial number
• IP address
• MAC address
COMMAND LINE
. . . . . . . . .
CONTROL
The WCP provides a terminal emulator that can be used to issue serial
commands from your PC (for details about serial commands see
Chapter 6 on page 86). This is useful if you are developing scripts for
controlling DGy 201 from an external controller.
• Opening the Terminal Window use the following procedure:
~ Locate the DGy 201 Configuration Page that opens
automatically when the DGy 201 WCP is launched
(
Figure 3-23)
Figure 3-23. DGy Configuration Page (WCP)
~ Click on the Terminal button at the bottom of the
Configuration Page
A Terminal window similar to that shown in Figure 3-24
should appear.