Filter
Top Products
COMMAND LINE INTERFACE
Command Summary
350-8697 DGy Model 201 User Guide 100
. . . . .
OUTPUT
. . . . . . . . .
COMMANDS
A summary of DGy 201 output commands is listed below. Click on the
hyperlink to see a detailed descriptors of the command.
Table 6-7. Output Commands Summary
Command Description
Sets the playback gamma.
A query command which returns information on the current output timing.
Sets the output mode to FreeRun or PlayBack.
This command selects the active format, analog RGB or DVI.
Sets the output raster to the timing selected from the Timing List.
Assigns a name to the current output timing.
Saves the timing data of the current output raster into the Timing List.
Sets the timing for the current output.
Refer to the “Output Commands Descriptions” section for descriptions
of all output commands.
GAMma
OUTPUT
OutputMode
OutPuTForMaT
OutPutTiMingLOAD
OutPutTiMingNAME
OutPutTiMingSAVE
OutPutTiMing