Filter
Top Products
OPERATIONS
WCP Simultaneous Record/Player Controls
350-8697 DGy Model 201 User Guide 38
. . . . .
To return to normal (1x) playspeed immediately from any
playspeed click on the Play button.
Note that pressing the Stop button will cause playback to cease
and the Slow Forward setting will be canceled.
25) Next Frame
The Next Frame and Previous Frame buttons allow you to step
through a clip one frame at a time. Note that the Next Frame
function is only available in the Pause mode.
To step forward a frame use the following procedure:
~ Select the clip that you want to play (Click on the Clip
Name label and select a clip from the clip dialog menu)
~ Click the Play button
~ Click the Pause button
~ Click the Next Frame button
Each click of the Next Frame button will move the displayed
image to the next frame until the end of clip is reached.
To cancel the Next Frame mode click on either the Play or Stop
buttons.
26) Play Loop
The Play Loop button (A-B) is used to set the beginning and end
points of a loop within a clip. To set up a play loop use the
following procedure:
~ Start playing the clip that you wish to loop from a point
before the place that you wish to start the loop from
~ When you have reached the point at which you wish to
start the loop click the A-B button. The machine status
indicator will display A- (without the B)
~ Continue playing the clip until you reach point at which
you would like to end the loop and click the A-B button
again. The machine status indicator (5) will display A-B
indicating that the end point has been set and the unit is
in the Play Loop mode.
To cancel the Play Loop mode use the following procedure:
Click the A-B button to cancel the Play Loop function. The
looping function can be canceled at any point during the loop.