Filter
Top Products
350-8697 DGy Model 201 User Guide 139
B
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COMMUNICATIONS SETUP
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IN THIS APPENDIX
This appendix provides detailed information about specific
communications setup procedures that are referenced in
Chapter 2,
“Installation and Set Up.” The following topics are discussed:
• Launching a Hyperterminal Window
• IP Address Setup via Serial Port
• IP Address Setup via Ethernet
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SERIAL COMMUNICATIONS
LAUNCHING A
HYPERTERMINAL
. . . . . . . . .
WINDOW
A command line interface is provided for DGy 201 using the serial port.
A full description of available commands is provided in
Command Line
Interface (see page 86).
PCs running the Windows Operating system are provided with serial
emulation software known as Hyperterminal. This provides a convenient
method to communicate with your DGy 201.
Use the following steps to launch a Hyperterminal window on your PC:
1. On your PC, click Start > Programs > Accessories > Commu-
nications > Hyperterminal.
Figure B-1. Hyperterminal Path