Filter
Top Products
63
Basic Operations
Notes on learning the signals of an air-conditioner
About seasonal adjustments
If you change the seasonal settings of your air-conditioner, you have to teach the
remote control signals of the new settings to the Remote Commander.
If the power-on/off operation does not work correctly
If the Remote Commander operates only “ON” or “OFF”, but not both, with a
learned key or button, while your air-conditioner’s remote control can operate
both “ON” and “OFF” with a single button, teach the signal on two separate
keys or buttons of the Remote Commander as follows.
1
Delete the remote control signal from the key or button to
which you taught the air-conditioner’s power-on/off signal. For
details on deleting the remote control signal, see “Deleting the
learned remote control signal” (page 64).
2
Teach the power-on signal of the air-conditioner’s remote
control for a key or button on the Remote Commander to which
you want to teach the power-on signal of the air-conditioner.
3
Teach the power-off signal of the air-conditioner’s remote
control for a key or button on the Remote Commander to which
you want to teach the power-off signal of the air-conditioner.
IMPORTANT
Be sure to place the Remote Commander out of the reach of small children or
pets.
Also set the Operation Lock function to lock the operation mode of the Remote
Commander (page 38) when it is not in use.
Components such as air conditioners, heaters and electric appliances may be operated
by infrared signals transmitted accidentally, and may cause a fire or a serious injury.