Filter
Top Products
CHAPTER 6: MANAGING IBM BLADECENTER SERVERS 101
7. Press F2 to verify the new name in the Selection Menu.
Renaming a Blade Server
By default, each of IBM BladeCenter server is named “IBM-Blade01,” “IBM-Blade02,” and so
on.
1. When Paragon’s OSUI is on the screen, press F5 to go to the Administration Menu.
2. Select the Channel Configuration submenu, and press Enter.
3. Select the IBM BladeCenter’s channel.
4. Press G to bring up a Channel Configuration menu for the IBM BladeCenter servers.
5. Use the Ç and È keys to highlight the Name field of any server whose name you want to edit.
Figure 83 Renaming the IBM Blade Server’s Channel
6. Press Enter - the highlight will turn light blue.
7. Type the desired server name - the highlight will turn green as you begin to type.
8. Press Enter - the highlight will turn yellow.
9. Repeat steps 5 through 8 if you want to edit other servers’ names.
10. Press S to save the new name(s).
11. Press F2 to go to the Selection Menu and check whether the server names are changed.