Filter
Top Products
28 PARAGON II USER GUIDE
Note: If your video image is fuzzy (especially if you are using an LCD flat-panel monitor),
you can adjust the video gain to focus the video image. If the OSUI is not displayed, activate
it by pressing the Scroll Lock key twice QUICKLY, then use the + and – (plus and minus)
keys on the numeric keypad to adjust the video image until it appears to be in focus. The P2-
EUST and P2-EUST/C provide automatic and manual skew compensation, which will also
help improve video quality. Please see Video Gain Adjustment and Skew Compensation in
P2-EUST in Chapter 3 for
additional information.
b. Press F5 to activate the Administration Menu. Use the Ç and È keys to move the
highlight to the Channel Configuration entry and press Enter.
Figure 23 Administration Menu
7. The Channel Configuration menu appears. Use the Ç and È keys or TAB to move the
yellow highlight to the Name field for the channel port number where you installed the server
and press Enter. The highlight turns light blue.
Figure 24 Channel Configuration Menu of a P2-UMT442
a. Edit the name (the highlight turns green when you start typing). Press Enter when
finished, and press S to save the new name.
b. Press F2 to return to the Selection Menu. Verify that the new name appears in the
Selection Menu.
8. Repeat steps 5 and 6 for each CIM and server you want to connect to the Paragon switch’s
channel ports.