Filter
Top Products
8 PARAGON II USER GUIDE
In the Name column, type P2-EUST-1.
In the IP address/Serial column, choose <Default Serial>.
In the Port column, type 2
. This represents the serial port -- COM2.
6. Ensure the check box before the user station is checked (
).
7. Click Load Hex File to select the firmware file.
8. To start the upgrade, click Send To Paragon Æ Yes.
9. Once the upgrade is completed, a message appears.
>> Refer to: General Update Procedure section in Chapter 8 and Paragon Manager User
Guide in the manual CD for details.