Filter
Top Products
146 PARAGON II USER GUIDE
USB Keyboard Layout Settings (P2CIM-AUSB, P2CIM-AUSB-B or
P2ZCIM-USB)
When you attach the server with a USB CIM and your keyboard is not US English (code 33), you
will have to change the keyboard layout setting. You need to press different hot key combinations
to enter the setting mode based on your CIM types.
1. Select the channel of the desired server in the Selection Menu, and press Enter.
2. Activate a text editor, such as Notepad, on the server.
3. Press Left Ctrl + NumLock to enter the setting mode. A message similar to the following
appears in the text editor.
For P2CIM-AUSB:
Figure 115 Keyboard Layout Setting (P2CIM-AUSB)
For P2CIM-AUSB-B or P2ZCIM-USB:
Figure 116 Keyboard Layout Setting (P2ZCIM-USB or P2CIM-AUSB-B)
A
Frequently-used keyboard layout codes
B
Current keyboard layout is US English (code 33)
4. Press the appropriate keyboard layout code (refer to the following table for codes).
5. Either press Esc to exit the setting mode or close the text editor.