Filter
Top Products
117
Connecting to a Home Network Using a Wireless Adapter
7
Connecting to a Home Network Using a
Wireless Adapter
Use this example if you have a home network that includes a wireless access point (WAP)
or wireless router, or for each Recorder in a wireless peer-to-peer network. On most home
networks, the wireless access point is part of an integrated hub/router and home
gateway.You can leave your Recorder plugged in while you connect a network adapter.
To connect a wireless network adapter to your Recorder:
1. Connect to the adapter. If it is not already attached, connect one end of the USB
cable that came with your wireless network adapter to the port located on the back of
the adapter.
2. Connect to the Recorder. Connect the other end of the USB cable to the USB port on
the Recorder. The power light on the wireless adapter may come on before the cable is
completely inserted into the USB slot. Make sure you push the cable all the way into
the USB slot.
Do not use the CDs that are included
with your network adapters to set
up your Recorders. These CDs are
intended to load drivers and network
adapter software on your personal
computer.
®
ᕣᕢ
ᕡ
The cable may already be attached
to your wireless network adapter.
®