Filter
Top Products
123
Completing the Recorder’s Network Settings
7
• A wireless password format. WEP passwords may be hexadecimal (a combination of
letters from A-F and numbers from 0-9), or alphanumeric (a combination of letters
from A-Z and numbers from 0-9). If your network has both an alphanumeric and a
hexadecimal password, we strongly recommend you use the hexadecimal password.
• A wireless password. It does not matter whether the letters of a hexadecimal
password are uppercase or lowercase, but for alphanumeric passwords, capitalization
is important. For example, if the password is “MyPassword,” then entering
“mypassword” will not work. Some hexadecimal passwords have only numbers.
• A level of wireless encryption. If you specify an alphanumeric password, you must
also specify a level of wireless encryption. Recorders are compatible with 40, 64, 104,
and 128-bit encryption; they are not currently compatible with 256-bit encryption.
Choose a format or select “The wireless network doesn’t use a password.” If you select
“The wireless network doesn’t use a password,” you will see the Confirm Settings screen,
described on page 124.
Wireless Password — Alphanumeric or Hexadecimal
• Hexadecimal (preferred). Enter a hexadecimal password using the arrow buttons on
the remote to highlight a character. Then press SELECT. It does not matter if a letter is
uppercase or lowercase. Some hexadecimal passwords contain only numbers.
• Alphanumeric. Enter an alphanumeric password using the arrow buttons on your
remote to highlight a character. Then press SELECT. You must use capital and
lowercase letters appropriately. For example, if your password is “MyPassword”,
entering “mypassword” will not work. Use THUMBS UP and THUMBS DOWN to
change to uppercase or lowercase. Select “Done entering text” when you are finished.