Filter
Top Products
18
Chapter 1
Connecting Your DVR
Watching One Channel & Recording Another
Antenna or Cable with No Cable Box
ᕡ Connect the Coaxial RF cable coming from the wall to the RF In jack on the Recorder.
ᕢ Connect a Coaxial RF cable from the RF Out jack on the Recorder to the Antenna/RF
In jack on your TV.
ᕣ Connect a Composite A/V cable from the Audio/Video Output jacks on the Recorder
to the Audio/Video Input jacks on your TV.
ᕤ Connect the phone cord (see page 8).
ᕥ Plug in all power cords and turn on your TV. You may have to find the correct TV
input setting by pressing the Input or TV/Video button on your TV’s remote control
until you see the Welcome screen. (For more help, see page 131.)
Once you see the Welcome screen, the final steps are to activate the TiVo service and
complete Guided Setup. If you need help, see Chapter 2.
The audio/video cables shown here
are for example only. For help
choosing cables, see page 4.
®
Antenna
In
INPUT
VIDEORL
Television
®
Recorder
35
2
4
1
How do I watch one channel
and record another?
To watch live TV on one channel while the
HUMAX DVD Recorder records another, put
the Recorder into Standby mode. To do
this, press the TiVo button on the
Recorder’s remote. Select Messages &
Setup, then Standby. Then use your TV’s
remote to change channels. Because this
signal simply passes through the
Recorder, it has no TiVo service
functionality (so you can’t pause or rewind
live TV ).
To watch video from the Recorder again,
press the TiVo button on the Recorder’s
remote, then press the Input, Source, or
TV/Video button on your TV remote or TV
until you see TiVo Central
®
.
®