Filter
Top Products
145
Questions About Audio and Video
8
• You may be using a channel list that does not include the channel you want. Use the number buttons on the remote control to enter
the channel number, then press ENTER. For more information on using a channel list see page 47.
Questions About Audio and Video
The audio and video are out of sync.
• The audio and video may re-sync if you change channels.
• You may be able to re-sync audio and video by pressing the INSTANT REPLAY button on the remote control.
• Press the TiVo button to go to TiVo Central, then press the LIVE TV button to return to live TV.
• You can also try restarting your Recorder. From TiVo Central, select Messages & Setup, then Restart or Reset System, then Restart
the Recorder. On the Restart the Recorder screen, press the THUMBS DOWN button three times, then press ENTER. You will see
the Welcome screen and the system will restart within a few minutes.
My Recorder was working, but now the picture does not move
• Try restarting your Recorder. From TiVo Central, select Messages & Setup, then Restart or Reset System, then Restart the Recorder.
On the Restart the Recorder screen, press the THUMBS DOWN button three times, then press ENTER. You will see the Welcome
screen and the system will restart within a a few minutes. You can also restart the Recorder by unplugging it, waiting at least 15
seconds, then plugging it back in.
I don’t get a picture now, even though I have been able to get one in the past.
• Someone in your household may have placed the Recorder in Standby mode. To return to normal mode from Standby, press either
the TiVo button or the LIVE TV button. (On some remotes, there is a POWER button that puts the Recorder in Standby mode and
takes it back out.)
• Your TV may not be set to the correct input. Most TVs have an input button that says either “TV/Video,” “Input,” or “Source.” It
may be on the TV or on the TV remote control. Look at your TV and TV remote and try changing the input for your TV.