Filter
Top Products
119
Connecting to a Home Network Using Wired (Ethernet)
7
Connecting to a Home Network Using Wired
(Ethernet)
This example shows you how to connect a Recorder to a network hub using a wired
(Ethernet) network adapter. You can leave your Recorder plugged in while you connect a
network adapter.
To connect a wired (Ethernet) network adapter to your Recorder and your network hub,
follow these steps:
1. Connect to the Recorder. Connect the USB end of the Ethernet adapter to the USB
port on the Recorder.
2. Connect Ethernet to the adapter. Plug one end of an Ethernet cable into the Ethernet
adapter.
3. Connect Ethernet to the hub or router. Plug the other end of the Ethernet cable into
your home network’s hub or router.
Do not use the CDs that are included
with your network adapters to set
up your Recorders. These CDs are
intended to load drivers and network
adapter software on your personal
computer.
®
USB-
Ethernet
ᕡ
ᕢ
ᕣ