Filter
Top Products
135
Questions About DVDs and CDs
8
• Check that the disc is loaded properly (aligned in the disc tray with the label side up).
• Remove the disc and clean it.
• Check that the disc has a region code compatible with the Recorder. If one of the regional codes on the disc does not match the
number on the back panel of the Recorder (region code 1), the disc can’t be played. Discs marked ALL will play in any DVD player.
Regional restriction codes are built-in to DVD players and DVDs for each sales region.
• There may be condensation in the player. Allow time for condensation to evaporate. Leave the Recorder for an hour or so, then try
again. If the Recorder is near an air-conditioning unit, you should move it.
The Recorder is not playing audio on a DVD.
• If playing a DTS DVD, the Recorder must be connected to a DTS Receiver to receive audio.
The DVD did not record successfuly.
• Check whether the source that you are trying to record is copy protected. You cannot record copy-protected material using this
Recorder. For more information, see “Compatibility and Copy Protected Material” on page 64.
• Check that there wasn’t a power outage during the recording.