Filter
Top Products
105
8
Making a Wireless Connection
Making a Wireless Connection
Use this example if you have a home network that includes a wireless access point (WAP)
or wireless router.
To connect a wireless network adapter to your Recorder:
1. Connect to the adapter. If it is not already attached, connect one end of the USB
cable that came with your wireless network adapter to the port located on the back of
the adapter.
2. Connect to the Recorder. Connect the other end of the USB cable to the USB port on
the Recorder. The power light on the wireless adapter may come on before the cable is
completely inserted into the USB slot. Make sure you push the cable all the way into
the USB slot.
3. Position the adapter. Position the adapter in an open location so that the signal is
easily transmitted. For example, if your Recorder is in an entertainment center, you
might place the adapter on top of your entertainment center. Do not place the wireless
RF BYPASS OUT
CABLE/
ANTENNA
RF IN
AC IN
ᕣᕢ
ᕡ
The cable may already be attached
to your wireless network adapter.
®
You can leave your Recorder
plugged in while you connect
a
network adapter.
®