Filter
Top Products
125
Questions About Channels and the Remote Control
9
I can’t go to one of my channels.
• You may be using a channel list that does not include the channel you want. Use the number buttons on the remote control to enter
the channel number, then press ENTER. For more information on using a channel list, see page 50.
• The channel you want may be showing a program that exceeds a limit set with Parental Controls. In this case, you will see only a
black screen with a notice that a limit has been exceeded. You will be able to tune to the channel if you use the Parental Controls
password. (For more information on Parental Controls, see page 53.) If your cable or satellite box has a feature like Parental
Controls, you may have to use the satellite or cable box’s remote to disable it as well.
I can’t find all the channels I receive in the Channels You Receive list.
• Have you changed your satellite or cable provider, or changed your subscription package? If you have, you should repeat Guided
Setup to specify your current cable or satellite provider and lineup. From TiVo Central, select Messages & Setup, then Restart or
Reset System, then Repeat Guided Setup. Press THUMBS DOWN three times, and then press ENTER. You may need to check all of
the available selections to find the right one since cable providers often change their lineups. For complete instructions on Guided
Setup, see Chapter 1.
• If you have not changed your cable or satellite provider, go to Messages & Setup, then select Settings, then Channels, then Cable
Lineup. Look at your cable bill, or make your best guess at what your lineup is called. Select it here, then check the Channels You
Receive list. If the channels are incorrect, try another Cable Lineup. If that does not work, check the back of this guide for further
troubleshooting help
My Recorder responds to my Pioneer A/V Receiver remote control.
• Some Pioneer A/V Receiver remote controls have a “DVR/VCR” button or a “VCR” button which, when pressed, may send a signal
that your Recorder responds to (for example, your Recorder may go to TiVo Central). You can program your Recorder to respond
only to the Recorder’s remote control if you wish by setting the Remote Address. See the Installation Guide for instructions.