Filter
Top Products
7
1
Completing Guided Setup
* Use the UP/DOWN arrows until the picture of the Recorder matches the
cable connection you used to connect your satellite or cable box. When the
video status below the picture says “Video OK,” press SELECT to continue. If
the video status says “No Video,” double-check that the video cable is
firmly connected to the Recorder and that you have selected the correct type
of video cable.
ᕡ
S
ate
lli
te on
l
y,
or cable with a box only:
ᕢ
Satellite & antenna,
or satellite & cable
w
ithout a box**:
2. Follow the directions
at the top of this page
(marked with *).
3. Highlight “Cable Box”
and press SELECT.
4. Follow the directions
at the top of this page
(marked with *).
5. Highlight “Accept
these input settings”
and press SELECT.
ᕣ Satellite & cable with a box**:
1. Use the UP/DOWN arrows
to highlight “Satellite Box”
and press SELECT.
2. Follow the directions at
the top of this page
(marked with *).
3. Use the DOWN arrow to
highlight “Accept these
input settings” and press
SELECT.
1. Highlight “Satellite
Box” and press SELECT.
** Setups with two
program sources like
these are only
available after you upgrade
to TiVo Plus. For more
information, visit
www.tivo.com/upgrade
.
®