Filter
Top Products
C2630M-C (7/09) 125
1. On the DX8100 toolbar, click the Setup button . The Setup dialog opens to the Camera page.
2. Click IP Camera Properties. The IP Camera Properties dialog box appears.
3. To assign an IP camera to a camera channel, do one of the following:
• Manual assignment:
(1) Click a check box to select a camera.
(2) Click the Manufacturer drop-down box and select a manufacturer. The port number, compression method, and video stream
settings automatically appear in the camera row.
Figure 91. Manually Entering IP Camera Data
(3) Click the IP drop-down box and enter the camera’s IP address.
Figure 92. Manually Entering IP Camera Data
• Automated assignment:
(1) Click Scan. Available IP devices appear in the Scan table.
(2) Click a supported IP camera.
(3) Click the Add button . The Connect dialog box opens.
(4) In the Connect drop-down box, click a camera.
(5) Click Apply. The selected camera is assigned to the designated camera channel.
Figure 93. Automated Assignment of an IP Camera